ClickShare

1. Make sure ClickShare is plugged into either Podium USB Port or your Laptop
   1. Use provided USB C to USB A dongle if needed
2. Set the Podium to PC – 1 and turn on the Projector
3. Wait until the circle on the ClickShare is a full White circle
4. Hit the big circular button inside the White circle
5. The button should turn Red and the image should appear on the projector

If the button does not turn red:

1. Unplug and re-plug the ClickShare into Podium USB port or your Laptop.
2. Wait up to 1-2 minutes until the circle is fully White and not flashing.
3. Hit the big circular button again and it should turn Red